 | Surge Protection Adapter
The PHD surge adapter is a “loop through” multi-plug unit and surge protector all in one. These units can be installed in workstation format, in a loop chain pattern. Each individual unit has 8 outlet sockets which operate separately from other units in the chain and each unit has full independant surge protection. A termination overload protected plug-top for power supply to the chain will be supplied for each chain of a maximum of 8 Surge Dimension units.The power and filter plug combines both surge/transient suppression and EMI/RFI filtration. These high performance devices are designed for the protection of sensitive electronic/electrical equipment against transients transmitted via the mains lines. |
|---|---|
 | Surge Cord Protection Unit
The surge cord power conditioner combines both surge/transient suppression and EMI/RFI filtration. The unit may be plugged into a standard socket and is connected to the equipment by means of standard IEC socket outlet(s). This compact and inexpensive plug-in unit has full suppression on all conductors and incorporates powerful filtration circuitry. View a more detailed spec sheet: here |
 | Telephone & Mains Surge Protection Unit
The protector is used to protect any electronic device connected to the telephone line including fax machines, answering machines, cordless telephones, modems and digital communications on alarm panels. (PHD101) View a more detailed spec sheet: here |
 | 100Base-T Data Surge Protection Unit
The 100Base-T data transient suppression units are designed to handle speeds in excess of 100 Mbps Full Duplex. They have an inser tion loss of less than 0.5dB. Interconnection is made by means of RJ-45 connection jacks. The units are available in 19” 1U rackmount panels (24-port) or as a stand alone unit (single port) in an 8-wire configuration. View a more detailed spec sheet: here |
 | Telephone Surge Protection
The telephone line conditioner affords powerful lightning protection to equipment which is connected to telephone lines i.e. fax machines, answering machines, computer modems, handsets etc. This telephone device is simply installed by means of an RJ-11 jack. A heavy duty version is also available for areas with very severe lightning activity. The unit is also supplied in a hard wire format for installation in an alternative position away from the telephone socket outlet. View a more detailed spec sheet: here |
 | Access Surge Conditioner
The access conditioner is designed to protect data and control lines for automatic gate systems, intercoms and alarm systems. The unit will handle data speeds in excess of 20 kbps with insertion losses of less than 0.1dB. For simple installation the unit is fitted with screw-type terminal blocks and is available in a ten line configuration. Standard voltages available are 5 to 48Vdc. Other voltages are available on request. View a more detailed spec sheet: here |
 | RS232 Surge Protection Line Conditioners
The RS232 line conditioners are used to protect the RS232/V.24 protocol. These compact devices are fitted into a standard gender bender housing with a DB25 or DB9 connector configuration. (Male to equipment, female to line). Reversed genders are also offered as a standard as indicated in the part number listing below. View a more detailed spec sheet: here |
 | RF Line Surge Protection Conditioners
The RFC coaxial unit is a transient suppression device designed to protect RF transceivers. It can be used for frequencies of up to 1GHz with negligible signal loss. The standard device is supplied fitted with “N” type female connectors. Other connector configurations are available on request. The unit is supplied in a compact housing with a removable gas discharge tube (GDT) for easy inspection/replacement. View a more detailed spec sheet: here |
 | Telephone Conditioners/PABX Systems
A full range of surge and lightning protection to interface with Krone Disconnect Modules. Installation is easy and grounding is done via connection to the existing frame. The PHD-104 range of plug-in modules protect the equipment and at the same time remain transparent to data flow, allowing it to operate at maximum speed and bandwidth without signal degradation. The PABX101 panel combines a power filter to protect the power supply, a 10-way disconnect protector which plugs into a 10-way Krone Disconnect Block to protect the telephone lines and a data network protector to protect the telephone management system. View a more detailed spec sheet: here |
Not Having Car Insurance is Akin to Not Installing Office Surge Protection
If you drive around South Africa without the necessary car insurance you will unquestionably be taking a huge risk as road safety in this country is a matter of grave concern, as is the high crime rate.
If you feel that you don’t need the kind of office surge protection that will safeguard your expensive electronic equipment against the numerous power surges, Brownouts, Blackouts and load-shedding episodes we are experiencing on an almost daily basis, then you are sadly mistaken.
Furthermore, our insurance service providers in South Africa are not always that accommodating when it comes to claiming for damages to expensive electronic equipment caused by issues related to erratic power supply.
It therefore cannot be stressed enough how important Office Surge Protection is, as it will shield your equipment against all those surges and dips that we are experiencing – especially as load shedding has become a common occurrence in the lives of South Africans.
Sensitive equipment such as all-in-one-devices, computers, faxes, DB Boards etc. all need to be functioning at all times to ensure you don’t experience down-time in your business as this can affect the profitability of your business.
Times are hard plus the economy is still quite volatile – this is particularly the case with economies such as those in Europe, and especially Greece.
We need to ensure that our businesses run at full speed with great efficiency without any interruptions – this means that power surges and outages should not affect how we conduct business and how we live our lives.
Using The Surge Protection Adapter is Easy:
- Try the PHD Surge Adapter which is a Multi-Plug “Loop Through” unit and surge protector all in one.
- The best part about using this type of unit is that it can be installed in a workplace arrangement in a Loop Chain pattern.
Try The PHD Telephone and Mains Surge Protection Unit:
- This is perfect for the protection of all your electronic devices affiliated with your telephone.
The above are only two examples of our wide range of what we offer those looking for Office Surge Protection; find out more about how you, too, can experience a fully uninterrupted business by contacting us for more on the many surge protection options we offer consumers.
AGENTS FOR
